0 Recommend
Decorative panel with caustics jt 1212
PRO
$7
Royalty free
Platform:3dsMax 2017 + fbx
Render:
V-Ray
Corona
Size:
6 MBNEW
Colors:
Style:Modern
Materials: Wood, Gypsum
Formfactor:
Published 15 October 2026
Relief wall 3D panel with caustic projection on the wall.
_
The reference used was the BE WATER Lamp
https://www.waw-collection.com/portfolio/be-water-lamp/ 
! The lamp is not in the scene!
The caustic is created in a fake way (does not slow down the render in Corona, Vray)
Do not change the depth of the box for the caustic light source, otherwise the projection will be visible on the outer surface.
To change the height of the projection – move the target of the light source.
Tone Mapping on the render: exposure = -1, change the intensity of the light sources depending on your Tone Mapping settings
To adjust the brightness intensity of the caustic, change the Multiplier in the light source, the color is adjusted there as well.
For the fbx file, a screenshot with settings is included in the archive.

Attention! This method has a significant drawback: objects placed above the light source do not cast shadows (only the projection itself is shaded).
____
Format: Max2017+Fbx
Render: Corona v12 (LegacyMtl)

For Corona render, it is recommended to use a version no lower than 1.5, as the glossiness of the materials is set with PBR in mind.
0 comments

Decorative panel with caustics jt 1212

PRO
$7
Royalty free
14
14
14
Platform:3dsMax 2017 + fbx
Render:
V-Ray
Corona
Size:
6 MBNEW
Colors:
Style:Modern
Materials: Wood, Gypsum
Formfactor:
Published 15 October 2026
Relief wall 3D panel with caustic projection on the wall.
_
The reference used was the BE WATER Lamp
https://www.waw-collection.com/portfolio/be-water-lamp/ 
! The lamp is not in the scene!
The caustic is created in a fake way (does not slow down the render in Corona, Vray)
Do not change the depth of the box for the caustic light source, otherwise the projection will be visible on the outer surface.
To change the height of the projection – move the target of the light source.
Tone Mapping on the render: exposure = -1, change the intensity of the light sources depending on your Tone Mapping settings
To adjust the brightness intensity of the caustic, change the Multiplier in the light source, the color is adjusted there as well.
For the fbx file, a screenshot with settings is included in the archive.

Attention! This method has a significant drawback: objects placed above the light source do not cast shadows (only the projection itself is shaded).
____
Format: Max2017+Fbx
Render: Corona v12 (LegacyMtl)

For Corona render, it is recommended to use a version no lower than 1.5, as the glossiness of the materials is set with PBR in mind.