Other models of GEFEST equipment:
https://3dsky.org/collection/shared/5292177 

The model uses materials:
CoronaPhysicalMtl - requires a CoronaRender of at least 7

Modern Gefest kitchen appliances. The model includes: hood VO 3603 D2A, hob PVG 1214-01 K2 (gas), electric oven DA 622-02 A.

Dimensions of the models (width x height x depth, mm):

Cooking hood: 600x1100x490
Cooking surfase: 600x45x515
Oven: 600x590x586

Features of the hood (Cooking hood):

It is possible to rotate the central cover over the filter - working condition. To do this, the group of Central cap hood elements can be rotated from position "0" to position "-59" and back.

Features of the cooking surface (Cooking surfase):

The gas on/off handles (Handle S) have a pivot in their own center and are able to rotate around their axis.

Features of the oven:

1.It is possible to open and close the oven door (Door set) - the pivot of the door is in the center of rotation of the door hinges.
2. It is possible to extend the Lattise1 grid in the increment mode to the position "-140" - as far as possible extended and back to the position "140" - as far as possible pushed.
3. It is possible to extend the Lattise2 grate together with the Pan pallet on the T rail shoulder telescopic rails. To do this, these elements are combined into a Pan group, which is pushed in increment mode to the position "-225" - as far as possible and back to the position "225" - as far as possible.
4. The oven on/off knobs (Handle) have a pivot in their own center and are able to rotate around their axis.