Thunderstorm 80 S 3000K 135×55°
Product ID: PL-2121.0000.0080-30.135055
Accessories
Description
Specifications
Dimensional drawing
Light distribution
Documents to download
Implemented projects
Description
A series of cantilever LED lighting fixtures:
• motorways, broadband highways,
• streets and roads of local importance,
• blocks and squares,
• house and yard territories,
• outdoor areas of industrial facilities.

Advantages of the series:
• cast housing with access to the switching compartment without tools;
• hot-swap power supply;
• high energy efficiency (up to 170 lm/W);
• protection against high-energy microsecond pulses up to 15 kV;
• ripple coefficient less than 1%;
• two types of lenses – 135x55° and 155x70°;
• tempered glass (optional);
• Compatible with various control systems (NEMA and Zhaga connectors (optional)).

Body
The cast aluminum body, coated with powder paint, provides small dimensions and weight, as well as an aesthetic appearance. Special silicone seals protect the housing from dust and moisture.
The housing design allows you to open the switching compartment without additional tools right at the installation site of the lamp. The cover of the switching compartment is removable.

LED module
The lamp has two aluminum LED boards made using SMT technology (135x55° – 100 LEDs, 155x70° – 198 LEDs). LEDs operate at low currents (50% of nominal and below), which increases the efficiency of the lamp and increases its service life.

Lens
The optics are made of UV-stabilized polycarbonate. Light transmission of at least 94%.
The lamps can be equipped with two types of lenses: 135x55° and 155x70°.

Power supply
The power supply in the metal housing is filled with a heat-conducting compound, which reduces the heating of its components, and the power supply lasts longer.
Protection against micro- and nanosecond pulses of high energy up to 15 kV.
Due to the knife connectors and the power supply installed on the cover of the switching compartment, the Groza S series has the possibility of hot–swapping the power supply - without removing the lamp from the support and disconnecting it from the supply network.

Bracing
With the help of a cantilever mount, the lamps are mounted on a round-section support with a diameter of up to 60 mm. To be able to adjust the angle of inclination, the lamps can be equipped with a swivel mount.