




















0 Recommend
Michelin Pilot Sport 275/35 ZR 18 set2
PRO
$7
Royalty free
| Platform: | 3dsMax 2012 + fbx |
| Render: | |
| Size: | 100 MBNEW |
| Polygons: | 42K |
| Colors: | |
| Length: | 29.1 cm |
| Width: | 64.97 cm |
| Height: | 64.97 cm |
| Style: | Modern |
| Materials: | Organics |
| Formfactor: |
Published 24 November 2025
Michelin Pilot Sport 275/35 ZR18 tires for sports and hypercars.
Tire size for front wheels. Tires are found on McLaren F1 GTR and LM / Mercedes-benz CLK GTR, Dodge Viper SRT.
Updated and re-uploaded since there is no possibility to re-upload the archive.
Metallic & Roughness workflow.
Changes:
1) Added tabs on the side (front side), can be removed: go to the smoothing group, select group 10 and delete;
2) All textures reviewed;
3) Two maps added to the IOR channel (with values somewhere between 1.35 and 1.45, since the tabulated IOR value for rubber at 1.519 looks too bright);
4) Added a variation with a matte/dusty tread, dirt mask, as well as a wet version;
5) Overall size changed, now 275 mm is the overall width of the tire without tabs (previously this was the tread size from seam to seam, changed because I found an image of a table on McLaren F1 indicating wheels with sizes 18X10F & 18X13R, i.e., 10 and 13 inches respectively; with the old values, the wheel would simply rattle in the tire);
In the archive, there are two models: for the right wheel (RF) and for the left (LF) (the difference is in the tread pattern, on the outer side the water channels are shifted forward);
Displacement map:
min -7.0mm
max +6.0mm
OZ racing wheels presented in previews 5 and 6:
https://3dsky.org/3dmodels/show/diski-oz-racing-crono-gtr-with-central-lock
Brembo brake disc with caliper
https://3dsky.org/3dmodels/show/brembo-crr-carbon-brake-system-with-2-pistons-caliper
Poly Count: 21264 quads / 42528 tris / 21880 verts. x2
Texture sizes: 4096*4096 pixels
A turbo smooth modifier with 1 iteration is applied to all previews.
If the CORONA version is above 1.4: "For Corona render, it is recommended to use a version no lower than 1.5, as the glossiness of the materials is set with PBR in mind."
Tire size for front wheels. Tires are found on McLaren F1 GTR and LM / Mercedes-benz CLK GTR, Dodge Viper SRT.
Updated and re-uploaded since there is no possibility to re-upload the archive.
Metallic & Roughness workflow.
Changes:
1) Added tabs on the side (front side), can be removed: go to the smoothing group, select group 10 and delete;
2) All textures reviewed;
3) Two maps added to the IOR channel (with values somewhere between 1.35 and 1.45, since the tabulated IOR value for rubber at 1.519 looks too bright);
4) Added a variation with a matte/dusty tread, dirt mask, as well as a wet version;
5) Overall size changed, now 275 mm is the overall width of the tire without tabs (previously this was the tread size from seam to seam, changed because I found an image of a table on McLaren F1 indicating wheels with sizes 18X10F & 18X13R, i.e., 10 and 13 inches respectively; with the old values, the wheel would simply rattle in the tire);
In the archive, there are two models: for the right wheel (RF) and for the left (LF) (the difference is in the tread pattern, on the outer side the water channels are shifted forward);
Displacement map:
min -7.0mm
max +6.0mm
OZ racing wheels presented in previews 5 and 6:
https://3dsky.org/3dmodels/show/diski-oz-racing-crono-gtr-with-central-lock
Brembo brake disc with caliper
https://3dsky.org/3dmodels/show/brembo-crr-carbon-brake-system-with-2-pistons-caliper
Poly Count: 21264 quads / 42528 tris / 21880 verts. x2
Texture sizes: 4096*4096 pixels
A turbo smooth modifier with 1 iteration is applied to all previews.
If the CORONA version is above 1.4: "For Corona render, it is recommended to use a version no lower than 1.5, as the glossiness of the materials is set with PBR in mind."
0 comments
Michelin Pilot Sport 275/35 ZR 18 set2
PRO
$7
Royalty free
8
| Platform: | 3dsMax 2012 + fbx |
| Render: | |
| Size: | 100 MBNEW |
| Polygons: | 42K |
| Colors: | |
| Length: | 29.1 cm |
| Width: | 64.97 cm |
| Height: | 64.97 cm |
| Style: | Modern |
| Materials: | Organics |
| Formfactor: |
Published 24 November 2025
Michelin Pilot Sport 275/35 ZR18 tires for sports and hypercars.
Tire size for front wheels. Tires are found on McLaren F1 GTR and LM / Mercedes-benz CLK GTR, Dodge Viper SRT.
Updated and re-uploaded since there is no possibility to re-upload the archive.
Metallic & Roughness workflow.
Changes:
1) Added tabs on the side (front side), can be removed: go to the smoothing group, select group 10 and delete;
2) All textures reviewed;
3) Two maps added to the IOR channel (with values somewhere between 1.35 and 1.45, since the tabulated IOR value for rubber at 1.519 looks too bright);
4) Added a variation with a matte/dusty tread, dirt mask, as well as a wet version;
5) Overall size changed, now 275 mm is the overall width of the tire without tabs (previously this was the tread size from seam to seam, changed because I found an image of a table on McLaren F1 indicating wheels with sizes 18X10F & 18X13R, i.e., 10 and 13 inches respectively; with the old values, the wheel would simply rattle in the tire);
In the archive, there are two models: for the right wheel (RF) and for the left (LF) (the difference is in the tread pattern, on the outer side the water channels are shifted forward);
Displacement map:
min -7.0mm
max +6.0mm
OZ racing wheels presented in previews 5 and 6:
https://3dsky.org/3dmodels/show/diski-oz-racing-crono-gtr-with-central-lock
Brembo brake disc with caliper
https://3dsky.org/3dmodels/show/brembo-crr-carbon-brake-system-with-2-pistons-caliper
Poly Count: 21264 quads / 42528 tris / 21880 verts. x2
Texture sizes: 4096*4096 pixels
A turbo smooth modifier with 1 iteration is applied to all previews.
If the CORONA version is above 1.4: "For Corona render, it is recommended to use a version no lower than 1.5, as the glossiness of the materials is set with PBR in mind."
Tire size for front wheels. Tires are found on McLaren F1 GTR and LM / Mercedes-benz CLK GTR, Dodge Viper SRT.
Updated and re-uploaded since there is no possibility to re-upload the archive.
Metallic & Roughness workflow.
Changes:
1) Added tabs on the side (front side), can be removed: go to the smoothing group, select group 10 and delete;
2) All textures reviewed;
3) Two maps added to the IOR channel (with values somewhere between 1.35 and 1.45, since the tabulated IOR value for rubber at 1.519 looks too bright);
4) Added a variation with a matte/dusty tread, dirt mask, as well as a wet version;
5) Overall size changed, now 275 mm is the overall width of the tire without tabs (previously this was the tread size from seam to seam, changed because I found an image of a table on McLaren F1 indicating wheels with sizes 18X10F & 18X13R, i.e., 10 and 13 inches respectively; with the old values, the wheel would simply rattle in the tire);
In the archive, there are two models: for the right wheel (RF) and for the left (LF) (the difference is in the tread pattern, on the outer side the water channels are shifted forward);
Displacement map:
min -7.0mm
max +6.0mm
OZ racing wheels presented in previews 5 and 6:
https://3dsky.org/3dmodels/show/diski-oz-racing-crono-gtr-with-central-lock
Brembo brake disc with caliper
https://3dsky.org/3dmodels/show/brembo-crr-carbon-brake-system-with-2-pistons-caliper
Poly Count: 21264 quads / 42528 tris / 21880 verts. x2
Texture sizes: 4096*4096 pixels
A turbo smooth modifier with 1 iteration is applied to all previews.
If the CORONA version is above 1.4: "For Corona render, it is recommended to use a version no lower than 1.5, as the glossiness of the materials is set with PBR in mind."
Are you sure you want to permanently delete the model?