Michelin Pilot Sport 345/35 ZR18 tires for sports and hypercars.
Size type for rear wheels. Tires are found on McLaren F1 GTR and LM / Mercedes-Benz CLK GTR, Dodge Viper SRT.

Updated and re-uploaded since there is no way to re-upload the archive.
Metallic & Roughness workflow.

Changes:
1) Added whiskers on the side (front side), can be deleted: go to the smoothing group, select group 10 and delete;
2) All textures revised;

3) Two maps added to the IOR channel (with values somewhere from 1.35 to 1.45, since the tabulated IOR value for rubber at 1.519 looks too bright);

4) Added a variation with a matte/dusty tread, dirt mask, and a wet version;

5) Overall size changed, now 345 mm is the total width of the tire without whiskers (previously it was the tread size from seam to seam, changed since I found an image of a table on McLaren F1, indicating wheels with sizes 18X10F & 18X13R, i.e., 10 and 13 inches respectively, with the old values the wheel would simply rattle in the tire);

OZ Racing wheels presented in previews 5 and 6:
https://3dsky.org/3dmodels/show/diski-oz-racing-crono-gtr-with-central-lock 
Brembo brake disc with caliper
https://3dsky.org/3dmodels/show/brembo-crr-carbon-brake-system-with-2-pistons-caliper 

The archive contains two models: for the right wheel (RR) and for the left (LR) (the difference is in the tread pattern, on the outer side the water channels are shifted forward);
Displacement map:
min -7.0mm
max +6.0mm

Poly Count: 21552 quads / 43104 tris / 22150 verts. x2
Texture sizes: 4096*4096 pixels

All previews have the TurboSmooth modifier applied with 1 iteration

If the CORONA version is above 1.4: "For Corona render, it is recommended to use version 1.5 or higher, as the glossiness of materials is set considering PBR."