Parquet engineering board GREENLINE DELUX 407 CHAMPLAIN

A three-dimensional fragment of the floor. Laying "at random". It can also be used as a tile with imitation wood.
The coverage area is 6000x6000 mm.
Polys: 1332 Verts: 1776
======================================
The archive contains:
- max_2016_VRay_5.1
- max_2016_Corona_6.2
- OBJ
- jpg - high-quality textures of wooden slats. All textures are in a separate folder. The texture resolution is 2048x295.
Developed without the use of plugins. Materials are created using CoronaMultiMap/VrayMultiSubTex (analogs of MultiTexture Map)
======================================
Characteristics of parquet:
Collection - Deluxe
Decor – 407 Champlain
Construction – two-layer engineering
Connection – comb-groove
Coating – 7 layers of UV varnish
The surface structure is smooth
The thickness of the top layer is 3.6 mm
The top layer is an oak lamella
Chamfer – V4 (M-shaped, 4 sides)
Width – 175 mm
Length – 1800 mm
Thickness – 15 mm
Offset – 400 mm
You can purchase slats of different lengths, widths and selections:
15x125x400-1500 mm
15x145x400-1500 mm
15x165x400-1500 mm
15x175x400-1500 mm
15x185x400-1800 mm
16x145x400-2100 mm
16x185x400-2100 mm
on the website:
https://parket-rf.net  /
or by visiting our store at the address:
690105, Primorsky Krai,
Vladivostok, 46/50 Borodinskaya str., Alliance 1st floor, showroom No. 7
info@parket-rf.ru
tel. +79025573794
Also in our profile you can find 3d models of flooring made using other materials and layouts
======================================
ADVANTAGES OF THE GREENLINE DELUXE ENGINEERING BOARD
• Top (valuable) layer: solid oak/ash lamella depending on the decor.
• Single-stripe design reveals the unique natural beauty of the wood structure.
• The two-layer construction consists of wood on a durable moisture-resistant plywood base. Thanks to this design, the collection combines naturalness, stability and affordable cost.
• The "comb-groove" connection provides reliable fastening of parquet slats, as well as high resistance to mechanical influences.
• The brushed structure is manifested due to special mechanical treatment of the top layer, favorably emphasizing the natural relief of wood.
• Factory coating with 7 layers of UV varnish protects the surface from scratches, abrasion, negative effects of moisture and the sun.
• Chamfer on 4 sides expressively highlights each bar, emphasizing the naturalness of the floor covering. In addition, the chamfer masks defects formed during operation, preserving the effect of the new floor for a long time.
• The thickness of the top layer provides the possibility of grinding the floor covering.
======================================
Who works in a V-Ray version lower than 3.1 be careful, there is a Microfaset GTR ( GGX) in the materials in the BRDF section, if your version is older than 3.1, then the BRDF field will be empty. Choose Blinn, Phong or Ward – which is preferable for you. For Corona render, it is recommended to install a version not lower than 1.5, since the glossiness of materials is configured with PBR in mind.
======================================
If textures are not visible when opening or importing a model in fbx format, then the following steps must be performed to display the textures. After importing, press SHIFT+T, select all the textures, right-click on them and select set path. Specify the path to the textures (the folder where the archive was unpacked)
======================================
Pre-rendering using Corona. Stage lighting is not included in the model. The model does not include backgrounds or scenes used in the preview images. All textures and materials are included and displayed in each format.
All elements have the correct layout and unique names. Units of measurement of the scene mm.