0 Recommend
Glass under the stove and fireplace floor heat-resistant set 2
PRO
$7
Royalty free
Platform:3dsMax 2017 + fbx
Render:
V-Ray
Corona
Size:
5 MBNEW
Polygons:3K
Colors:
Length:110 cm
Width:110 cm
Height:1 cm
Style:Modern
Materials: Glass
Formfactor:
Published 24 April 2023
The pre-furnace sheet is used as a protective heat-resistant surface that protects the floor from damage and burning. Made from 10mm heat resistant glass. Allows you to use it in different interiors in combination with different models of heating stoves and fireplace stoves.

Model 1: S8 oven glass
Link: https://europechi.ru/catalog/aksessuary-pechi-kamini/pritopochnye-listy/napolnoe-pokrytie-iz-stekla/Steklo-pod-pech-S8.html 

Model 2: S9 oven glass
Link: https://europechi.ru/catalog/aksessuary-pechi-kamini/pritopochnye-listy/napolnoe-pokrytie-iz-stekla/Steklo-pod-pech-S9.html 

Model 3: S5 oven glass
Link: https://europechi.ru/catalog/aksessuary-pechi-kamini/pritopochnye-listy/napolnoe-pokrytie-iz-stekla/Steklo-pod-pech-S5.html 

Model 4: Floor glass SP3 (for oven) 1100*1100 mm
Link: https://europechi.ru/catalog/aksessuary-pechi-kamini/pritopochnye-listy/napolnoe-pokrytie-iz-stekla/steklo_napolnoe_sp3_pod_pech_1100_1100_mm.html 

Model 5: Floor glass SP2 (for oven) 1100*1100 mm
https://europechi.ru/catalog/aksessuary-pechi-kamini/pritopochnye-listy/napolnoe-pokrytie-iz-stekla/steklo_napolnoe_sp2_pod_pech_1100_1100_mm.html 

Model 6: S4 oven glass
Link: https://europechi.ru/catalog/aksessuary-pechi-kamini/pritopochnye-listy/napolnoe-pokrytie-iz-stekla/Steklo-pod-pech-S4.html 

Those who work in V-Ray versions lower than 3.1, be careful, in the materials in the BRDF section there is Microfaset GTR ( GGX ), if your version is older than 3.1, then the BRDF field will be empty. Choose Blinn, Phong or Ward - whatever suits you best.

For Corona render, it is recommended to install a version of at least 1.5, since the glossiness of materials is configured with PBR in mind. Double sections VRay + Corona. If your main engine is Corona, we recommend that you do not use scripts for conversion and create all VRay materials manually. Carefully check each material so that there are no Corona Bitmap left in the Vray materials, in the card slots
0 comments

Glass under the stove and fireplace floor heat-resistant set 2

PRO
$7
Royalty free
12
12
12
Platform:3dsMax 2017 + fbx
Render:
V-Ray
Corona
Size:
5 MBNEW
Polygons:3K
Colors:
Length:110 cm
Width:110 cm
Height:1 cm
Style:Modern
Materials: Glass
Formfactor:
Published 24 April 2023
The pre-furnace sheet is used as a protective heat-resistant surface that protects the floor from damage and burning. Made from 10mm heat resistant glass. Allows you to use it in different interiors in combination with different models of heating stoves and fireplace stoves.

Model 1: S8 oven glass
Link: https://europechi.ru/catalog/aksessuary-pechi-kamini/pritopochnye-listy/napolnoe-pokrytie-iz-stekla/Steklo-pod-pech-S8.html 

Model 2: S9 oven glass
Link: https://europechi.ru/catalog/aksessuary-pechi-kamini/pritopochnye-listy/napolnoe-pokrytie-iz-stekla/Steklo-pod-pech-S9.html 

Model 3: S5 oven glass
Link: https://europechi.ru/catalog/aksessuary-pechi-kamini/pritopochnye-listy/napolnoe-pokrytie-iz-stekla/Steklo-pod-pech-S5.html 

Model 4: Floor glass SP3 (for oven) 1100*1100 mm
Link: https://europechi.ru/catalog/aksessuary-pechi-kamini/pritopochnye-listy/napolnoe-pokrytie-iz-stekla/steklo_napolnoe_sp3_pod_pech_1100_1100_mm.html 

Model 5: Floor glass SP2 (for oven) 1100*1100 mm
https://europechi.ru/catalog/aksessuary-pechi-kamini/pritopochnye-listy/napolnoe-pokrytie-iz-stekla/steklo_napolnoe_sp2_pod_pech_1100_1100_mm.html 

Model 6: S4 oven glass
Link: https://europechi.ru/catalog/aksessuary-pechi-kamini/pritopochnye-listy/napolnoe-pokrytie-iz-stekla/Steklo-pod-pech-S4.html 

Those who work in V-Ray versions lower than 3.1, be careful, in the materials in the BRDF section there is Microfaset GTR ( GGX ), if your version is older than 3.1, then the BRDF field will be empty. Choose Blinn, Phong or Ward - whatever suits you best.

For Corona render, it is recommended to install a version of at least 1.5, since the glossiness of materials is configured with PBR in mind. Double sections VRay + Corona. If your main engine is Corona, we recommend that you do not use scripts for conversion and create all VRay materials manually. Carefully check each material so that there are no Corona Bitmap left in the Vray materials, in the card slots