The tabletop, front panels, tops, bottoms, and sides of the supports are made of 38 mm thick Laminated Chipboard in Anthracite Sherman Oak, edged with 2 mm ABS impact-resistant edge banding. The table connector is made of 18 mm thick Laminated Chipboard in Anthracite Sherman Oak, edged with 0.8 mm ABS impact-resistant edge banding. The support connectors are made of 18 mm thick MDF in Green Stone with a PerfectSense Matt surface on the front side. The supports are installed on a 38 mm thick base made of Laminated Chipboard, edged with 2 mm ABS impact-resistant edge banding in Green Stone color. Between the tabletop and the supports are 8 mm thick spacers made of Laminated Chipboard, recessed 4 mm from the edges of the tabletop and supports, and edged with 1 mm ABS impact-resistant edge banding in PerfectSense Matt.