Michelin Pilot Sport 275/35 ZR18 tires for sports and hypercars.
!!! The updated version is here:
https://3dsky.org/3dmodels/show/michelin-pilot-sport-275-35-zr-18-set2 

Tire size for the front wheels of McLaren F1 GTR/LM.
To fit your car on both sides, simply use object duplication (WITHOUT MIRRORING).
The front and back sides are correctly set by default, and you can also refer to the arrow next to the rotation label.
Attention! The tread pattern and inscriptions are created using a displacement/height map.
The Displacement map is a 16-bit grayscale set with minimum values of -7.0 mm and maximum of +6.0 mm.
Metallic & Roughness workflow.

Developed around 1995 for the needs of McLaren F1 GTR/LM for public roads (produced in limited quantities for this car to this day).
Modeled for subdivision with 40 edges around, applied 1 iteration of subdivision, collapsed, and applied another subdivision for rendering.
If necessary, you can remove excess edges on the tread side and inner side after checking the seams on the UV map; 80 edges around are sufficient even for close angles.
Two options for channels: Color and Roughness.
Total width is 289.476 mm, tread from seam to seam is ~ 275 mm (+/- error after subdivision).
Poly Count: 8848 quads / 17696 tris / 8870 verts.
Texture sizes: 4096*4096 pixels

If the CORONA version is above 1.4: "For Corona render, it is recommended to use version no lower than 1.5, as the glossiness of materials is set with PBR in mind."