0 Recommend
Michelin Pilot Sport 345/35 ZR 18
PRO
$7
Royalty free
| Platform: | 3dsMax 2015 + fbx |
| Render: |  Corona |
| Size: | 64 MBNEW |
| Polygons: | 19K |
| Colors: | |
| Length: | 69.87 cm |
| Width: | 37.39 cm |
| Height: | 69.87 cm |
| Style: | Modern |
| Materials: | Organics |
| Formfactor: |
Published 1 August 2025
Michelin Pilot Sport 345/35 ZR18 tires for sports and hypercars.
!!! The updated version is here:
https://3dsky.org/3dmodels/show/michelin-pilot-sport-345-35-zr-18-set2
The tire size for the rear wheels of McLaren F1 GTR/LM.
To fit your car on both sides, simply use object duplication (WITHOUT MIRRORING).
The front and back sides are set up correctly by default, and you can also refer to the arrow next to the rotation label.
Attention! The tread pattern and inscriptions are created using a displacement/height map.
The Displacement map is a 16-bit grayscale set with values of min -7.0 mm and max +6.0 mm.
Metallic & Roughness workflow.
Developed around 1995 for the needs of McLaren F1 GTR/LM for public roads (produced in a limited edition for this car to this day).
Modeled for subdivision with 40 edges around, 1 iteration of subdivision applied, collapsed, and an additional subdivision applied for rendering.
If necessary, you can remove unnecessary edges on the tread side and the inner side, first checking the seams on the UV map; 80 edges around are sufficient even for close angles.
Two options for channels: Color and Roughness.
The total width is 373.915 mm, tread from seam to seam ~ 345 mm (+/- error after subdivision).
Poly Count: 9808 quads / 19616 tris / 9830 verts.
Texture sizes: 4096*4096 pixels
If the CORONA version is above 1.4: "For Corona render, it is recommended to use a version no lower than 1.5, as the glossiness of materials is set with PBR in mind."
!!! The updated version is here:
https://3dsky.org/3dmodels/show/michelin-pilot-sport-345-35-zr-18-set2
The tire size for the rear wheels of McLaren F1 GTR/LM.
To fit your car on both sides, simply use object duplication (WITHOUT MIRRORING).
The front and back sides are set up correctly by default, and you can also refer to the arrow next to the rotation label.
Attention! The tread pattern and inscriptions are created using a displacement/height map.
The Displacement map is a 16-bit grayscale set with values of min -7.0 mm and max +6.0 mm.
Metallic & Roughness workflow.
Developed around 1995 for the needs of McLaren F1 GTR/LM for public roads (produced in a limited edition for this car to this day).
Modeled for subdivision with 40 edges around, 1 iteration of subdivision applied, collapsed, and an additional subdivision applied for rendering.
If necessary, you can remove unnecessary edges on the tread side and the inner side, first checking the seams on the UV map; 80 edges around are sufficient even for close angles.
Two options for channels: Color and Roughness.
The total width is 373.915 mm, tread from seam to seam ~ 345 mm (+/- error after subdivision).
Poly Count: 9808 quads / 19616 tris / 9830 verts.
Texture sizes: 4096*4096 pixels
If the CORONA version is above 1.4: "For Corona render, it is recommended to use a version no lower than 1.5, as the glossiness of materials is set with PBR in mind."
0 comments
Michelin Pilot Sport 345/35 ZR 18
PRO
$7
Royalty free
9
| Platform: | 3dsMax 2015 + fbx |
| Render: | Corona |
| Size: | 64 MBNEW |
| Polygons: | 19K |
| Colors: | |
| Length: | 69.87 cm |
| Width: | 37.39 cm |
| Height: | 69.87 cm |
| Style: | Modern |
| Materials: | Organics |
| Formfactor: |
Published 1 August 2025
Michelin Pilot Sport 345/35 ZR18 tires for sports and hypercars.
!!! The updated version is here:
https://3dsky.org/3dmodels/show/michelin-pilot-sport-345-35-zr-18-set2
The tire size for the rear wheels of McLaren F1 GTR/LM.
To fit your car on both sides, simply use object duplication (WITHOUT MIRRORING).
The front and back sides are set up correctly by default, and you can also refer to the arrow next to the rotation label.
Attention! The tread pattern and inscriptions are created using a displacement/height map.
The Displacement map is a 16-bit grayscale set with values of min -7.0 mm and max +6.0 mm.
Metallic & Roughness workflow.
Developed around 1995 for the needs of McLaren F1 GTR/LM for public roads (produced in a limited edition for this car to this day).
Modeled for subdivision with 40 edges around, 1 iteration of subdivision applied, collapsed, and an additional subdivision applied for rendering.
If necessary, you can remove unnecessary edges on the tread side and the inner side, first checking the seams on the UV map; 80 edges around are sufficient even for close angles.
Two options for channels: Color and Roughness.
The total width is 373.915 mm, tread from seam to seam ~ 345 mm (+/- error after subdivision).
Poly Count: 9808 quads / 19616 tris / 9830 verts.
Texture sizes: 4096*4096 pixels
If the CORONA version is above 1.4: "For Corona render, it is recommended to use a version no lower than 1.5, as the glossiness of materials is set with PBR in mind."
!!! The updated version is here:
https://3dsky.org/3dmodels/show/michelin-pilot-sport-345-35-zr-18-set2
The tire size for the rear wheels of McLaren F1 GTR/LM.
To fit your car on both sides, simply use object duplication (WITHOUT MIRRORING).
The front and back sides are set up correctly by default, and you can also refer to the arrow next to the rotation label.
Attention! The tread pattern and inscriptions are created using a displacement/height map.
The Displacement map is a 16-bit grayscale set with values of min -7.0 mm and max +6.0 mm.
Metallic & Roughness workflow.
Developed around 1995 for the needs of McLaren F1 GTR/LM for public roads (produced in a limited edition for this car to this day).
Modeled for subdivision with 40 edges around, 1 iteration of subdivision applied, collapsed, and an additional subdivision applied for rendering.
If necessary, you can remove unnecessary edges on the tread side and the inner side, first checking the seams on the UV map; 80 edges around are sufficient even for close angles.
Two options for channels: Color and Roughness.
The total width is 373.915 mm, tread from seam to seam ~ 345 mm (+/- error after subdivision).
Poly Count: 9808 quads / 19616 tris / 9830 verts.
Texture sizes: 4096*4096 pixels
If the CORONA version is above 1.4: "For Corona render, it is recommended to use a version no lower than 1.5, as the glossiness of materials is set with PBR in mind."
Are you sure you want to permanently delete the model?